HOME    SEARCH    ABOUT US    CONTACT US    HELP   
           
Rule: 4.12.734 Prev     Up     Next    
Rule Title: SYSTEMS MOUNTED ON TRUCKS, SEMI-TRAILERS AND TRAILERS FOR TRANSPORTATION OF NITROGEN FERTILIZER SOLUTIONS
Add to My Favorites
Add to Favorites
Department: AGRICULTURE, DEPARTMENT OF
Chapter: AGRICULTURAL SCIENCES DIVISION
Subchapter: Anhydrous Ammonia Rules
 
Latest version of the adopted rule presented in Administrative Rules of Montana (ARM):

Printer Friendly Version

4.12.734    SYSTEMS MOUNTED ON TRUCKS, SEMI-TRAILERS AND TRAILERS FOR TRANSPORTATION OF NITROGEN FERTILIZER SOLUTIONS

(1)  ARM 4.12.725 applies to this section.

(2)  Mounting containers in trucks:

(a)  Stops (wood or metal blocks)  shall be mounted on the truck, semi-trailer, trailer, or on the container in such a way that the container shall not be dislodged from its mounting due to the vehicle coming to a sudden stop. Back slippage shall also be prevented.

(b)  Hold-down devices shall anchor the container to the cradle, frame, or chassis in a manner to prevent the container from rolling or bouncing off the vehicle and that will not create undue concentration of stress.

(c)  Any truck or trailer designed so that the container or containers constitute in whole or part the stress member of the chassis of the vehicle in lieu of a frame shall be constructed to withstand the additional stresses which are imposed. Cradles, when welded, shall be welded to the container by a welder who is registered under the code and shall be designed to withstand a force in any direction equal to two (2)  times the weight of the container when filled with nitrogen fertilizer solution.

(d)  If a liquid withdrawal line is installed in the bottom of a container, the connections thereto, including hose, shall not be lower than the lowest horizontal edge of the trailer axle.

(e)  Both ends of the hose shall be secured while in transit.

(f)  When the cradle and the tank are not welded together, material which will not deteriorate with weather or create a friction shall be used between them to eliminate metal-to-metal friction.

History: Sec. 80-10-503, MCA; IMP, Sec. 80-10-503, MCA; NEW, 1986 MAR p. 1820, Eff. 10/31/86.


 

 
MAR Notices Effective From Effective To History Notes
10/31/1986 Current History: Sec. 80-10-503, MCA; IMP, Sec. 80-10-503, MCA; NEW, 1986 MAR p. 1820, Eff. 10/31/86.
Home  |   Search  |   About Us  |   Contact Us  |   Help  |   Disclaimer  |   Privacy & Security