HOME    SEARCH    ABOUT US    CONTACT US    HELP   
           
Rule: 24.183.403 Prev     Up     Next    
Rule Title: BOARD SEAL
Add to My Favorites
Add to Favorites
Department: LABOR AND INDUSTRY, DEPARTMENT OF
Chapter: BOARD OF PROFESSIONAL ENGINEERS AND PROFESSIONAL LAND SURVEYORS
Subchapter: General Provisions
 
Latest version of the adopted rule presented in Administrative Rules of Montana (ARM):

Printer Friendly Version

24.183.403    BOARD SEAL

(1) The seal of the board shall be an embossed circular seal, one and one-half inches in diameter, consisting of two concentric circles. The inner circle shall contain the Great Seal of the state of Montana and the seal shall contain the wording: "Montana Board of Professional Engineers and Professional Land Surveyors".

History: 37-67-202, MCA; IMP, 37-67-201, MCA; Eff. 12/31/72; TRANS, from Dept. of Prof. & Occup. Lic. , Ch. 274, L. 1981, Eff. 7/1/81; TRANS, from Commerce, 2002 MAR p. 1756.


 

 
MAR Notices Effective From Effective To History Notes
7/1/1981 Current History: 37-67-202, MCA; IMP, 37-67-201, MCA; Eff. 12/31/72; TRANS, from Dept. of Prof. & Occup. Lic. , Ch. 274, L. 1981, Eff. 7/1/81; TRANS, from Commerce, 2002 MAR p. 1756.
Home  |   Search  |   About Us  |   Contact Us  |   Help  |   Disclaimer  |   Privacy & Security