(1) Perforations above the lowest expected static
water level shall not be permitted. Wells may be completed with perforations as
(a) in-place perforations with star, mills knife, similar type perforators, millslotted,
sawed, or drilled;
(b) perforated inner casing, either torch-cut, millslotted or punched. Such
inner casing may be of steel, plastic or other suitable corrosion-resistant
material, but if other than steel, a full evaluation of the structural
stability of the inner casing must be made prior to its placement. They may be
used in a natural development or gravel packed type of construction. Where
appropriate, the top of the inner casing shall be fitted with suitable packers
or sealing material and sealed to the well casing.
(2) Casing perforations that allow the well casing to act as a conduit for
deleterious interflow between aquifers shall
permitted. (That is, interflow where waters of different heads, temperatures,
or quality mix causing deleterious effects.)
(3) Perforations shall not be placed to allow cascading water within the well
casing during static conditions.
(4) Perforations shall not be
placed to allow upward artesian flow from one aquifer to another.